Dissolved Oxygen Probe
|Article number:||Part # ENV-40-DOX|
|Availability:||In stock (21)|
Galvanic dissolved oxygen probe with PTFE membrane.
1 meter cable incl BNC connector.
A galvanic dissolved oxygen probe consists of a PTFE membrane, an anode bathed in an electrolyte and a cathode. Oxygen molecules defuse through the probes membrane at a constant rate (without the membrane the reaction happens too quickly). Once the oxygen molecules have crossed the membrane they are reduced at the cathode and a small voltage is produced. If no oxygen molecules are present, the probe will output 0 mV. As the oxygen increases so does the mV output from the probe. Each probe will output a different voltage in the presence of oxygen. The only thing that is constant is that 0mV = 0 Oxygen. (A galvanic dissolved oxygen probe can also be used to detect the Oxygen content in gases).
|Range||0 − 100 mg/L|
|Accuracy||+/– 0.05 mg/L|
|Response time||~0.3 mg/L/per sec|
|Max pressure||3,447 kPa (500PSI)|
|Max depth||343 meters (1,125 ft)|
|Temperature range °C||1 − 50 °C|
|Cable length||1 meter|
|Internal temperature sensor||No|
|Time before recalibration||~1 Year|
|Life expectancy||5 Years +|